Sony Service Menu

Contents

1 Sony Service Menu Method 1

2 Sony Service Menu Method 2

3 Sony Service Menu Method 3

4 Sony Service Menu Method 4

5 Sony Service Menu Navigation Tips

Sony Service Menu Method 1

Put the TV in standby mode then press the following buttons on the remote: {DISPLAY} {5} {VOL+} {POWER}

Sony Service Menu Method 2

Put the TV in standby mode then press the following buttons on the remote: {DISPLAY} {5} {POWER}

Sony Service Menu Method 3

Put the TV in standby mode then press the following buttons on the remote: {DISPLAY} {5} {PICTURE} {POWER}

Sony Service Menu Method 4

Put the TV in standby mode then press the following buttons on the remote: {DISPLAY} {5} {VOL+} {PICTURE} {POWER}

Sony Service Menu Navigation Tips

Exit Service Menu = <Power>

Menu Next = <1>

Menu Previous = <4>

Category Next = <2>

Category Previous = <5>

Adjust Up = <3>

Adjust Down = <6>

Save New Settings = <MUTE> <ENTER>

Restore Factory Defaults = <8> <ENTER>

Sharp Service Menu

Contents

1 LCD Sets

2 Other Sets (CRT)

3 Alternative Method

4 Sharp Projector Service Menu Access Method 1

5 Sharp Projector Service Menu Access Method

LCD Sets

1. While the LCD is on, unplug the power cable.
2. Then while pressing the {INPUT} & {VOL -} buttons on the remote, plug the power cable back into the outlet.
3. When it powers up you will see a little "k" appear in brackets.
4. Then on the TV, press and hold {VOL -} & {CH -} down and release.
5. The Service Menu will be displayed.

Use {CH+} {CH -} buttons to navigate, Use {VOL+} {VOL -} buttons to adjust the value.

Other Sets (CRT)

1. Unplug the TV
2. Press and hold the {VOL -} & {CH+} buttons.
3. While holding the above buttons, plug in the TV.
4. The TV will turn on with the Service Menu displayed.

Use {CH+} {CH -} buttons to navigate, Use {VOL+} {VOL -} buttons to adjust the value.

Alternative Method

1. Press the {MENU} button.
2. Then press the {4} {7} {2} {5} buttons.
3. The Service Menu will be displayed.
   1. Use the {UP} {DOWN} buttons to select items.
   2. Use the {LEFT} {RIGHT} buttons to change settings.
4. To exit, turn the power off.

Sharp Projector Service Menu Access Method 1

1. Press {UP}, {UP}, {DOWN}, {DOWN}, {RIGHT}, {LEFT} & {ENTER} buttons on the remote control.

Sharp Projector Service Menu Access Method 2

1. Press {INPUT}, {UP}, {DOWN}, {ENTER}, {ENTER} & {MENU} buttons on the back of the Projector.
2. To exit the Service Menu: Press {INPUT}, {UP}, {DOWN}, {ENTER}, {ENTER} & {MENU} buttons again on the back of the Projector.

Sanyo Service Menu

Contents

1 Sanyo TV Service Menu Method 1

2 Sanyo TV Service Menu Method 2

3 Sanyo Projector Service Menu Method 1

3.1 Factory Menu Access

3.2 Service Menu Access

4 Sanyo Projector Service Menu Method Sanyo TV Service Menu Method 1

1. Unplug the power cable.
2. Press and hold the {MUTE} button on the remote control while plugging the power cable back into the outlet.
3. Keep pressing the {MUTE} button until the TV powers on with the Service Menu displayed.
4. Use the {CH+} {CH-} buttons to select menus.
5. Use the {VOL+} {VOL -} buttons to change settings.
6. Some menus might have sub-addresses. Use the numeric buttons {0} to {7} to adjust sub-item data.
7. Press the {MENU} button or turn the TV off to exit.

Sanyo TV Service Menu Method 2

1. Unplug the power cable.
2. Press and hold the {VOL -} button on the TV while plugging the power cable back into the outlet.
3. Keep pressing the {VOL -} button until the TV powers on with the Service Menu displayed.
4. Use the {CH+} {CH-} buttons to select menus.
5. Use the {VOL+} {VOL -} buttons to change settings.
6. Some menus might have sub-addresses. Use the numeric buttons {0} to {7} to adjust sub-item data.
7. Press the {MENU} button or turn the TV off to exit.

Sanyo Projector Service Menu Method 1

Factory Menu Access

1. Press and hold the {SELECT} and {INPUT} buttons on the Projector at the same time for about 10 seconds.
2. The Factory Menu will be displayed.

Service Menu Access

1. Press and hold the {MENU} and {INPUT} buttons on the Projector at the same time for about 10 seconds.
2. The Service Menu will be displayed.
3. Use the {UP} {DOWN} {LEFT} {RIGHT} buttons to move through menus and change values.
4. To exit, turn the Projector Off.

Sanyo Projector Service Menu Method 2

1. Press & hold the {MENU} button on the Projector for about 10 seconds.
2. The Service Menu will be displayed.
3. Use the {UP} {DOWN} {LEFT} {RIGHT} buttons to move through menus and change values.
4. To exit, turn the Projector Off.

Samsung Service Menu

Contents

1 How To Get into The Samsung Service Menu

1.1 Method 1

1.2 Method 2

1.3 Method 3

1.4 Method 4

1.5 Method 5

1.6 Method 6

2 Samsung LCD Monitor Service Menu Instructions

How To Get into The Samsung Service Menu

You can use the Samsung service menu, for such things as resetting the digital tuner, a total factory reset and enabling/disabling hotel mode. In this mode you must be careful as you can cause irreparable damage to your set.

Method 1

Put TV on standby and then push in series these buttons on the remote: 'info, menu, mute, power' the TV will then turn itself on and display a menu.

Method 2

Turn the power off. On the remote, press Mute followed by 1, 8, 2, Power in sequence.

Method 3

With the TV in standby, press the {DISPLAY} {P.STD} {MUTE} {POWER} on the remote.

Method 4

With the TV in standby, press the {SLEEP} {P.STD} {MUTE} {POWER} on the remote.

Method 5

With the TV in standby, press the {DISPLAY} {MENU} {MUTE} {POWER} on the remote.

Method 6

With the TV in standby. On the remote, press Mute followed by 1, 1, 9, Enter in sequence.

Samsung LCD Monitor Service Menu Instructions

1. Power on the lcd monitor and open the OSD menu.
2. Set the Brightness and Contrast to 0.
3. Then press and hold the "SOURCE or ENTER" button for 5 second until the "SERVICE FUNCTION MENU" pop-up.