Sanyo Service Menu
Contents
1 Sanyo TV Service Menu Method 1
2 Sanyo TV Service Menu Method 2
3 Sanyo Projector Service Menu Method 1
3.1 Factory Menu Access
3.2 Service Menu Access
4 Sanyo Projector Service Menu Method Sanyo TV Service Menu Method 1
- Unplug the power cable.
- Press and hold the {MUTE} button on the remote control while plugging the power cable back into the outlet.
- Keep pressing the {MUTE} button until the TV powers on with the Service Menu displayed.
- Use the {CH+} {CH-} buttons to select menus.
- Use the {VOL+} {VOL -} buttons to change settings.
- Some menus might have sub-addresses. Use the numeric buttons {0} to {7} to adjust sub-item data.
- Press the {MENU} button or turn the TV off to exit.
Sanyo TV Service Menu Method 2
- Unplug the power cable.
- Press and hold the {VOL -} button on the TV while plugging the power cable back into the outlet.
- Keep pressing the {VOL -} button until the TV powers on with the Service Menu displayed.
- Use the {CH+} {CH-} buttons to select menus.
- Use the {VOL+} {VOL -} buttons to change settings.
- Some menus might have sub-addresses. Use the numeric buttons {0} to {7} to adjust sub-item data.
- Press the {MENU} button or turn the TV off to exit.
Sanyo Projector Service Menu Method 1
Factory Menu Access
- Press and hold the {SELECT} and {INPUT} buttons on the Projector at the same time for about 10 seconds.
- The Factory Menu will be displayed.
Service Menu Access
- Press and hold the {MENU} and {INPUT} buttons on the Projector at the same time for about 10 seconds.
- The Service Menu will be displayed.
- Use the {UP} {DOWN} {LEFT} {RIGHT} buttons to move through menus and change values.
- To exit, turn the Projector Off.
Sanyo Projector Service Menu Method 2
- Press & hold the {MENU} button on the Projector for about 10 seconds.
- The Service Menu will be displayed.
- Use the {UP} {DOWN} {LEFT} {RIGHT} buttons to move through menus and change values.
- To exit, turn the Projector Off.
No comments:
Post a Comment